Brightfield Filter Sets
Showing 3 products
- (-) Remove Brightfield Filter Sets filter Brightfield Filter Sets
Center/Edge/Notch Wavelength
Filter Type
- (-) Remove Brightfield Filter Sets filter Brightfield Filter Sets
First Emission Wavelength
33002v2
NC706479 - Brightfield
Premounted in a Olympus XL (91030)
Qty in Stock: 1
For using epi-illumination to visualize sample with white light. This set uses a 50/50 beamsplitter, E420LPv2 mounted in the excitation port to block UV light from harming the eyes, and KG1 mounted in the emission port to minimize NIR.
- While supplies last
- No modifications on size or coating
- Covered by normal warranty
- Normal support provided
- Show:
- Transmission
- Optical Density
- Overview
33002v2
Brightfield
For using epi-illumination to visualize sample with white light. This set uses a 50/50 beamsplitter, E420LPv2 mounted in the excitation port to block UV light from harming the eyes, and KG1 mounted in the emission port to minimize NIR.
Coating: Sputter/Hard Coated
Typical Application(s): Widefield Microscopy
Microscopes: Filter cube mounting options are available when adding to cart.
Listed prices apply to:
- Round excitation and emission filters mounted in anodized aluminum rings 2.3-5.0mm thick, up to 25mm in diameter
- Rectangular dichroics up to 26x38mm, 1mm thick, to fit standard microscope manufacturer filter cubes
- Show:
- Transmission
- Optical Density
- Overview
33001
IGS Standard
This filter set is designed to image gold and silver particles with epi-illumination. The set uses a 50/50 beamsplitter and a sandwiched filter consisting of GG420 Schott absorption glass to block UV from harming eyes, two crossed polarizing films, and KG5 to block the IR.
Coating: Sputter/Hard Coated
Typical Application(s): Widefield Microscopy
Microscopes: Filter cube mounting options are available when adding to cart.
Listed prices apply to:
- Round excitation and emission filters mounted in anodized aluminum rings 2.3-5.0mm thick, up to 25mm in diameter
- Rectangular dichroics up to 26x38mm, 1mm thick, to fit standard microscope manufacturer filter cubes
