Single Bandpass Filter Sets & 49000 Series
Chroma’s 49000 series of single band sets features our highest throughput sputter coatings (ET) which achieve the highest transmission levels for interference filters. These filters have very steep transitions from peak transmission to high optical density to best exploit the spectral properties of modern fluorochromes with short Stokes shifts. This is because steep transitions allow for very little spectral separation between excitation and emission bands.
These filters offer the greatest hardness and durability against environmental factors such as high heat and humidity, and are covered by Chroma’s lifetime warranty. All ET filters sets provide zero-pixel-shift image registration* between filter sets, at no additional cost.
*It is important to note that filters are only one factor in achieving perfect image registration in imaging systems. All other components and devices must also be in register.
Showing 4 products
- (-) Remove Single Bandpass Filter Sets filter Single Bandpass Filter Sets
- (-) Remove 49000 Series filter 49000 Series
- (-) Remove Blue (440 - 479nm) filter Blue (440 - 479nm)
Center/Edge/Notch Wavelength
Filter Type
- (-) Remove Single Bandpass Filter Sets filter Single Bandpass Filter Sets
Fluorochrome
- Alexa Fluor 350™ (1) Apply Alexa Fluor 350™ filter
- Atto 390 (1) Apply Atto 390 filter
- Biosearch Blue (2) Apply Biosearch Blue filter
- Coumarin (1) Apply Coumarin filter
- DAPI (2) Apply DAPI filter
- DyLight 350 (1) Apply DyLight 350 filter
- DyLight 405 (1) Apply DyLight 405 filter
- EBFP2 (2) Apply EBFP2 filter
- Hoechst 33258 (1) Apply Hoechst 33258 filter
- LysoTracker Blue/MeOH (2) Apply LysoTracker Blue/MeOH filter
- Pacific Blue (1) Apply Pacific Blue filter
- TagBFP (2) Apply TagBFP filter
First Emission Wavelength
- Violet (400 - 439nm) (1) Apply Violet (400 - 439nm) filter
- (-) Remove Blue (440 - 479nm) filter Blue (440 - 479nm)
- Cyan (480 - 509nm) (3) Apply Cyan (480 - 509nm) filter
- Green (510 - 559nm) (7) Apply Green (510 - 559nm) filter
- Yellow/Orange (560 - 609nm) (4) Apply Yellow/Orange (560 - 609nm) filter
- Red (610 - 649nm) (6) Apply Red (610 - 649nm) filter
- Near IR ( 650nm+) (7) Apply Near IR ( 650nm+) filter
Chroma Series Number
- (-) Remove 49000 Series filter 49000 Series
- Overview
49000
ET - DAPI
Coating: Sputter/Hard Coated
Typical Application(s): Widefield Microscopy
Microscopes: Filter cube mounting options are available when adding to cart.
Listed prices apply to:
- Round excitation and emission filters mounted in anodized aluminum rings 2.3-5.0mm thick, up to 25mm in diameter
- Rectangular dichroics up to 26x38mm, 1mm thick, to fit standard microscope manufacturer filter cubes
Filters in this Set | Price | ||
---|---|---|---|
AT350/50x V2 (EX) | $ | 225.00 | |
T400lp (BS) | $ | 250.00 | |
ET460/50m (EM) | $ | 365.00 |
- Overview
49021
ET - EBFP2/Coumarin/Attenuated DAPI
Coating: Sputter/Hard Coated
Typical Application(s): Widefield Microscopy
Microscopes: Filter cube mounting options are available when adding to cart.
Listed prices apply to:
- Round excitation and emission filters mounted in anodized aluminum rings 2.3-5.0mm thick, up to 25mm in diameter
- Rectangular dichroics up to 26x38mm, 1mm thick, to fit standard microscope manufacturer filter cubes
Filters in this Set | Price | ||
---|---|---|---|
ET405/20x (EX) | $ | 365.00 | |
T425lpxr (BS) | $ | 250.00 | |
ET460/50m (EM) | $ | 365.00 |
- Overview
49028
ET – DAPI for 395nm light sources
Coating: Sputter/Hard Coated
Typical Application(s): Widefield Microscopy
Microscopes: Filter cube mounting options are available when adding to cart.
Listed prices apply to:
- Round excitation and emission filters mounted in anodized aluminum rings 2.3-5.0mm thick, up to 25mm in diameter
- Rectangular dichroics up to 26x38mm, 1mm thick, to fit standard microscope manufacturer filter cubes
Filters in this Set | Price | ||
---|---|---|---|
ET395/25x (EX) | $ | 365.00 | |
T425lpxr (BS) | $ | 250.00 | |
ET460/50m (EM) | $ | 365.00 |
- Overview
49053
ET - DAPI for 355-405nm LEDs
Optimized for use with CoolLED light engines.
This set features a wide band excitation filter which is compatible with a broad range of LEDs with peaks between 355-405nm, intended for fluorophores such as DAPI. This set is intended for use with LEDs. If instead, it is used with a broad white light source such as a mercury or metal halide lamp, the excitation filter will transmit very high levels of light to the sample.
Coating: Sputter/Hard Coated
Typical Application(s): Widefield Microscopy
Microscopes: Filter cube mounting options are available when adding to cart.
Listed prices apply to:
- Round excitation and emission filters mounted in anodized aluminum rings 2.3-5.0mm thick, up to 25mm in diameter
- Rectangular dichroics up to 26x38mm, 1mm thick, to fit standard microscope manufacturer filter cubes
Filters in this Set | Price | ||
---|---|---|---|
ET385/70x (EX) | $ | 365.00 | |
T425lpxr (BS) | $ | 250.00 | |
ET460/40m (EM) | $ | 365.00 |